The medium effect filter cotton increases the fine fiber layer of fracture resistance.,and the density of the fiber layerncreased gradually along the air flow direction.The tensile strength is high and the resistance is small.
After spraying or dipping,the high temperature powdercompletely permeates the medium to avoid the breakingand shedding of the fiber.At the same time,dust particlescan not pass through.The main body is composed ofantivolatile solvent and does not contain organosilicon.
The top cotton is covered with polyester grid,and canguide the uniform distribution of air flow.Mainly used in automobile spray,paint workshop,assembly workshop ceiling cotton.The temperature resistance is about 120℃,the moisture resistance is strong,and the moisture resistance is 100%relative humidity.
M5/F5/V600 Spray Booth Ceiling Intake Filter Tacky With Scrim Back
Product Technical Datas
|
Type |
Thickness mm |
Air Velocity |
Initial Resistance Pa |
Final Resistance Pa |
Efficiency |
Dust Capacity g/sqm |
Thermal Resistance |
Humidity 100% |
|
F5 |
20 |
0.3-0.6 |
35 |
250 |
98% |
438 |
120℃ |
100 |
|
F5 |
25 |
0.3-0.6 |
35 |
250 |
98% |
500 |
120℃ |
100 |
Specially designed for terminal filtration of auto spray-paint booth as final filtration barrier to filter the particles which will damage spray-paint quality out from the intake air stream.
High dust holding capacity, low pressure drop and economical.
Full soaking an adhesive and sticky coating effectively prevent any release of fibers and prohibit of particles larger than 10microns; Constructed from selected high-performance synthetic fiber by progressive density multi-layer technique.
Ensures the air throughout the out assembly shops and automatic refinishing factory’s spray-paint booth evenly spreads, forming laminar air flow.
Conform to the fire-proofing classification standards of European Union DIN53438-F1and American UL900-Class 1.
Quality conforms to EN779 standard.
Resistant to chemical impacts of such as chemical solvents and acid smog.
Adhesive and enhanced rigidity ensure high dust holding capacity, robust construction and resistance to squeezing.
The air exit side of filter media is particularly compact and smooth.
Technical Data
| F5- 560G | |
| Air Velocity: | 0.3 m/s |
| Thickness | 20mm |
| Initial Resistance: | 25pa |
| Final Resistance: | 450pa |
| Efficiency: | 98% |
| Dust Holding: | 500 g/sqm |
| Max Temperature: | 120C |
| Wet | 100% |
| Filtration Class: | F5 (DIN 24185) |
| Flame Resistance: | F-1(DIN 53438) |
| F5- 600G | |
| Air Velocity: | 0.25 m/s |
| Thickness | 20mm |
| Initial Resistance: | 30pa |
| Final Resistance: | 450pa |
| Efficiency: | 99% |
| Dust Holding: | 500 g/sqm |
| Max Temperature: | 120C |
| Wet | 100% |
| Filtration Class: | F5 (DIN 24185) |
| Flame Resistance: | F-1(DIN 53438) |
